Posts Tagged ‘Allen’

Happy Valentine’s Day From Your Local Dallas HVAC Contractors!

Tuesday, February 14th, 2012

We wish you a very happy Valentine’s Day! Valentine’s Day is the perfect time to show your appreciation to everyone who makes a difference in your life. Even a small gift, like a batch of cookies or a homemade card, can really make someone feel special. Your friends, your family, and your significant other will all have a fantastic Valentine’s Day if you take a moment to let them know how important they are to you.

Calling us for an HVAC upgrade might seem like a usual gift, but it can actually be something that benefits your whole family. An improved indoor air quality system can make air cleaner and healthier, and a new heating system can make your home more comfortable and save you money by lowering your utility bills. Those are improvements that every member of your family can enjoy.

If you have any questions about upgrades for your heating and air conditioning system, give A#1 Air a call today! And to help you celebrate this sweet holiday, here is a recipe for Chocolate Mint Cookies

Ingredients

  • 3/4 cup butter
  • 1 1/2 cups packed brown sugar
  • 2 tablespoons water
  • 2 cups semisweet chocolate chips
  • 2 eggs
  • 2 1/2 cups all-purpose flour
  • 1 1/4 teaspoons baking soda
  • 1/2 teaspoon salt
  • 36 chocolate mint wafer candies

Directions

  1. In a large pan over low heat, cook butter, sugar and water until butter is melted. Add chocolate chips and stir until partially melted. Remove from heat and continue to stir until chocolate is completely melted. Pour into a large bowl and let stand 10 minutes to cool off slightly.
  2. At high speed, beat in eggs, one at a time into chocolate mixture. Reduce speed to low and add dry ingredients, beating until blended. Chill dough about 1 hour.
  3. Preheat oven to 350 degrees F (175 degrees C).
  4. Roll dough into balls and place on ungreased cookie sheet about 2 inches apart. Bake 8-10 minutes. While cookies are baking unwrap mints and divide each in half. When cookies are brought out of the oven, put 1/2 mint on top of each cookie. Let the mint sit for up to 5 minutes until melted, then spread the mint on top of the cookie. Eat and enjoy!

For more details, visit allrecipes.com.

Tags: , ,
Posted in air filtration, heating system, Indoor Air Quality | Comments Off

Question from Allen: What is a Gas Furnace Draft Hood?

Monday, December 26th, 2011

As every Allen HVAC contractor knows, a draft hood is a necessary part of any gas burning appliance. For a gas furnace in particular it ensures steady air flow to the burners to avoid flares or the pilot light being put out by fluctuation in temperature and air flow.

What the Draft Hood Does

The draft will change in the chimney as exhaust vents towards it – especially when going from cold air to hot. A draft hood is placed above the upper most part of the gas furnace to draw air into the chimney and makes it possible to draw more or less air through the chimney as necessary to create a constant flow.

This makes it possible for the burner to enjoy consistent air flow without any wind gusts or sudden temperature spikes or drops. Hot air, if not put through a draft hood would create a strong air flow through the burners.

A draft hood cools the air as it is released by the burners from 500 degrees F to between 300 degrees F and 350 degrees F. The cooling needs to be carefully calibrated to avoid condensation build up in the chimney however – a problem that occurs when the temperature gets too low.

Maintaining Pressure

The draft hood is a part of a larger system designed to maintain air flow to the chimney. For every cubic foot of gas burned, the furnace needs to have 15 cubic feet of air for combustion and another 15 cubic feet of air for dilution. A draft hood and the rest of the ventilation system make it possible to put a furnace that has many thousands of BTUs in the basement of your home and still supply it with enough air to burn gas and dilute the exhaust before it enters the chimney.

For all of these reasons, if you see your pilot light flickering irregularly, notice a backflow of exhaust or a burning smell in your furnace room, it’s important to call an Allen professional who can inspect and repair the problem before it becomes any worse. Not only can gas burner exhaust contain high levels of carbon monoxide, it can be bad for the device and the chimney if it doesn’t vent properly.

Tags: , , , , ,
Posted in Heating | Comments Off

A Guide from an Allen Heating Contractor: Where to Place a Thermostat for Accurate Heating

Saturday, December 10th, 2011

It’s easy to forget that with your furnace in the basement churning away all day to keep your Allen home warm, but your thermostat is the single most important device in ensuring your home is heated to the temperature you want. If it stops working or it misreads the temperature inside your home, your furnace won’t know what temperature it actually is and will turn on and off at the wrong time.

Where Not to Place Your Thermostat

To avoid inaccurate readings, avoid placing your thermostat in the following locations:

  • Direct Sunlight – Direct sunlight will almost always increase the perceived temperature of the thermostat. Unless you live in a greenhouse, this will be very uncomfortable for everyone in your home.
  • Windows – Windows can result in direct sunlight and breezes. If the windows are not properly sealed, cold air can blow in and make it seem cooler in your home than it really is. In any of these cases, your thermostat will misread the indoor temperature.
  • Drafts – Drafts from improperly sealed doors, windows, or anything else in your home can negatively impact the thermostat.
  • Heat Vents – Don’t place your thermostat near a radiator or heat vent where it is likely to be warmer than anywhere else in the house.
  • Kitchens – Kitchens tend to be warmer than other rooms in the house, especially when in use. Avoid placing a thermostat here unless you have a zone control system and your kitchen is separate from other rooms.

A properly placed thermostat will ensure your home is heated or cooled to the temperature you desire regardless of outdoor conditions. If you’re unsure whether your thermostat is calibrated properly, check the temperature with a separate thermometer in a different location in the same room. If it is significantly warmer or cooler in one place than another, try to determine which is more indicative of the actual comfort level in your home. When properly located, your thermostat should never be an issue again.

Tags: , , , , ,
Posted in Heating | Comments Off

The Beauty of Zone Heating: Some Advice from Allen

Tuesday, November 29th, 2011

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your Allen home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace or heat pump. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Tags: , , , , ,
Posted in Heating | Comments Off

Air Source Heat Pumps: Some Pointers from Mesquite

Tuesday, November 15th, 2011

Most heating systems in Mesquite have as their main component some sort of heat generator, such as a furnace. These machines generate heat through some form of combustion, which obviously converts energy directly to heat, which is then distributed throughout the home. That’s a pretty simplified schematic explanation, but that’s more or less how most heating systems work.

Air source heat pumps are another type of heating solution; one that does not actually produce or generate any actual heat. There is no combustion. What an air source heat pump (ASHP) does instead is regulate the temperature of the home by essentially moving air around.

An air source heat pump use electricity to exchange indoor and outdoor air. Think of it like a more versatile air conditioner. In cooling mode, like an air conditioner, an ASHP will pump warm air from the inside out, using a system of refrigerant-filled coils and a compressor. By turning the ASHP to heating mode, the refrigerant flow is reversed, allowing the outdoor coils to extract heat from the outdoor air and pump it in higher concentrations to the inside.

If it seems like a simple system, that’s because it is. All the heat pump does is move heat either in or out, depending on what you need in the current season. Because this process generates no heat on its own, heat pumps can be very efficient. ASHP efficiency has been estimated at 150% to 300%, meaning that the heat energy produced is up to three times as much as the electricity used. That makes for a very efficient home heating and cooling solution.

Air source heat pumps are not necessarily right for every situation, however. In colder climates, where temperatures drop below 30 degrees Fahrenheit for stretches at a time, a heat pump will likely not be able to keep up on its own. In these situations, you may either need to supplement the ASHP with an additional heating source, or use a different system altogether. Newer so-called “cold climate” heat pumps may also be an option. Under ideal circumstances, an air source heat pump can act as a complete home heating system, as well as providing heat for hot water.

If you are looking for a simple and efficient home heating solution, look into whether an air source heat pump can work for you.

Tags: , , , , ,
Posted in Heat Pump | Comments Off

The Ins and Outs of Ductless Splits Air Conditioning: A Guide From Allen

Thursday, October 6th, 2011

So, it’s time to install a new air conditioner in your Allen house and you’re pretty sure there just isn’t enough room in the walls or ceilings to place the necessary ductwork. No problem. There is a rapidly evolving technology that allows you to have air conditioning without ductwork. It’s called mini-split ductless air conditioning and it relies on individual units placed in key locations around your house. Here’s how they work.

Multi-Zone Cooling

The first step is to install a central unit. This is your compressor and condenser and is usually placed outside like the core of a central AC system. These units range between 15,000 and 40,000 BTUs depending on how much cooling your home needs and will support up to 4 zones within your house.

Once the central unit is installed, smaller room-sized units are placed throughout your house. These units are designed for between 9,000 and 18,000 BTU spaces and are usually placed high on the wall of your room to distribute cooled air. The smaller units are connected to the main unit by refrigerant lines that are run up the side of your house (or inside if you want them out of the elements).

Because each indoor unit is individual and has its own thermostat, you save electricity by having direct control over each part of your home. In fact, the average ductless split system uses something like 30% less electricity than a standard air conditioning system.

Is it Right for You?

This is the most common question we hear and to be honest, it really depends on your needs. If you have a large house – we’re talking 3,000 square feet or bigger, a multi-zone ductless system may not provide enough cooling on its own. Most systems only support up to 4 individual units and therefore cannot cool massive spaces. However, if you have a smaller home, or more importantly have no space for ductwork, these systems are much more efficient than installing multiple window units.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Common Problem Areas for HVAC Systems: Some Pointers From Allen

Thursday, August 18th, 2011

No one wants to have to call a contractor in to inspect their Allen home’s HVAC system. Problems in heating or air conditioning tend to be costly and time consuming to fix. But, the longer you wait, the bigger the problem is likely to get. So, it’s important to act quickly when you suspect a problem with any of the following common sources in an HVAC system:

  • Power Lines – Your HVAC system uses a lot of electricity so if it stops working, turns off suddenly or frequently shuts down, it may be a power issue. If the system stops working at any point, check your breaker box for a blown fuse or tripped breaker. You should also check the electrical line to your HVAC system. If you see any damage from animals, weather or otherwise, call a professional immediately.
  • Gas Lines – if you have gas furnaces and appliances, gas supply problems can be a major issue for your HVAC system. There are a number of safety measures in place in a gas line system. The gas valve connecting the gas line to your furnace has as safety shutoff switch. Your home has a carbon monoxide detector. A pressure drop in the system will also cause a shutoff. So, the most common problem you would face with a gas line is that is stops providing gas, usually because there is a problem in a component. If this happens, call the gas company immediately to check your system, and of course if you smell a leak, leave the house and call the emergency line for your gas company.
  • Drains – Air conditioners have drain pipes that release the condensed water that builds up inside as they run. However, over time, that drain can clog up if it’s not properly maintained. If you have a central air conditioning unit, check the drain pan once every week or so to make sure it is draining properly. Frequently, this drain pipe will be located higher in your home so that it can drain properly away from the property. Call a professional if it continues to clog or fails to drain at all.
  • Venting – Vent problems can result in more than just stuffy air. Clogged or dirty vents are fire hazards and they can decrease indoor air quality, making it both uncomfortable and unhealthy inside. Vents and ductwork should be cleaned annually to avoid the buildup of debris and sediment. Additionally, you should do a visual inspection once a month to check for debris and vacuum the space where possible.

Most of the problems commonly associated with your HVAC system need to be checked and repaired by a professional. However, by remaining vigilant and checking them regularly, you can avoid a much bigger problem and subsequent repairs.

Tags: , , , , , ,
Posted in Home Maintenance | Comments Off

How to Add Freon to a Central Air Conditioning Unit

Sunday, May 29th, 2011

An air conditioner cannot cool your home without an adequate amount of Freon. So if you’ve noticed a drop off in the cooling power of your central air conditioning system, inadequate Freon levels may be the culprit. But before you try to add more Freon to your unit, there are several things you need to know.

Low Freon Means a Leak

The truth is that your central air conditioning system should never need to be “topped off” with Freon. The coolant in your unit is part of a closed loop system and doesn’t get used up like fuel. Instead it continues to circulate through your compressor, absorbing and releasing heat to keep the air passing through it cool and comfortable.

If the level of Freon inside your air conditioner drops below the proper level, it generally means there’s a leak somewhere in your system and you’ll need a qualified professional to find that leak and make the necessary repairs.

Professional Access and Expertise

Even if you’re inclined to add Freon to your unit, you’ll probably have a hard time getting your hands on it. As an EPA regulated substance, Freon can only be purchased by EPA certified technicians. If you’re able to purchase this type of coolant for your air conditioner, you’ll need to make sure you know what type your unit uses. Most air conditioners these days use either R22 or R-134a. It’s important that you only use the type of Freon that your air conditioner is built for.

Potential for Harm

Freon is regulated so strictly because it is an extremely hazardous substance. It can harm you or your family and it can do a lot of damage if accidentally released into the atmosphere. To top everything off, if you do accidentally release it, you could be subject to some hefty EPA fines.

In extreme cases, you can do irreparable damage to your air conditioning system by trying to add Freon inappropriately or without proper training. For all of these reasons, it’s best to let a certified professional check and, if necessary, top off the Freon levels in your AC system. For the minimal cost of this service, you can avoid risking the health and safety of your family as well as that of your AC system.

Tags:
Posted in Air Conditioning | Comments Off