Posts Tagged ‘Fort Worth’

How Heating Zone Control Can Save You Money in Fort Worth

Thursday, February 9th, 2012

The costs of heating your home in Fort Worth have risen dramatically over the past couple of decades, thanks to higher energy costs and price increases for heating maintenance. Despite the strides made in energy efficiency, there seems to be no end in sight for the steady rise in heating equipment operating costs.

Now add in the cost of heating unoccupied areas of your home, such as basements, hallways, or extra bedrooms, and the energy costs go even higher. Most of these costs are unnecessary and avoidable if you have the time and a small investment in a well-planned heating “strategy” for your home. This strategy involves using heating zone controls to make the most efficient use of your heating system.

In a nutshell, here is how heating zone control works. The rooms in your home are connected to your heating system by a series of ductwork, which carries heated and conditioned area to all corners. But some of these areas may not need to be heated as much – or possibly at all – compared to other rooms in your home. For example, do you need heat in your kitchen but not in your basement? Most people would answer yes. Or they may say they need more heat in the kitchen and some, but not very much heat in the basement.

Or try this: do most people in your house spend more time in one room, such as the family room, and less time in their bedrooms? If so, why would it be necessary to heat the bedrooms all of the time? In order to deliver heat to areas in your home that need it the most, the ductwork to these rooms should always be “open.” Ductwork to other unused areas of your home can be “closed” during various times of the day.

Opening and closing of ductwork and airflow is achieved by zone controls. A zone control is installed in the home which electronically or wirelessly opens and closes “dampers” in the ductwork, depending on the heating demand. You can divert heat to areas of your home using zone control and dampers while decreasing the heating load on your furnace. This type of heating zone control will move heated air to where you want it. Simply put, you are not heating areas of your home that don’t need the heat.

The heating zone controls can be programmed for various times of the day, too. For example, you may not need any heat in your basement while you sleep or when you are away from home. You can program the damper in your basement’s ductwork to remain closed or partially open during these times. In a sense, the heating zone control in your home acts like a programmable thermostat – only it uses a series of dampers to control indoor temperatures.

The next time you walk into an unused part of your home, think about how much money you are spending to heat it. It makes sense to consider heating zone controls. The initial costs of installing zone controls and dampers are minimal and the payback in energy savings and comfort are substantial.

If you have any questions about how controls can save you money please call A Number 1 Air.

Tags: , ,
Posted in Energy savings, Heating, Heating Maintenance | Comments Off

Do Fort Worth Residents need to supplement Their Heat Pumps with Another Heating System?

Tuesday, February 7th, 2012

Fort Worth residents often turn to heat pumps as a solution for their home heating and cooling needs because they want a single, all-inclusive system that covers all the bases. The convenience and simplicity is part of the allure of choosing a heat pump to begin with.

However, it’s not always that simple. There are situations where a heat pump is not enough to handle the needs of the whole home. This doesn’t necessarily mean that the whole idea goes out the window, but the heat pump may need some help in the form of a supplementary heating supply.

Here are some reasons/situations that may call for a supplemental heat source in addition to a heat pump:

1.     A Cold Climate – Although heat pumps can serve as the primary heating system when temperatures drop as low as 30 degrees Fahrenheit, they have trouble keeping up when the cold snap lasts longer than a few days. In any climate where temperatures dip below this mark for a length of time, a supplemental heating system like a furnace is recommended.

2.     A Large Home – Heat pumps come in many different sizes, but if yours does not have the capacity to match the size of your home, then it won’t be able to heat the whole house. It’s as simple as that. If you are installing a new heat pump, be sure to get one that is properly sized. But, if you have an existing heat pump that is overmatched by your home’s size, simply supplementing it may be the easiest solution.

3.     The Power Goes Out – A heat pumps’ use of electricity is a benefit in most situations, but unfortunately it means they are helpless when the power goes out. To avoid suffering in the winter chill when a blizzard takes out a local power line, have a backup/supplemental heat source on hand to use until the power comes back on.

Those are a few situations you may encounter in which supplementing a heat pump is a good idea. Remember, though, that each situation is different. When installing a new heat pump, contact A Number 1 Air, HVAC professional installers, beforehand to see if you should also have a supplemental heat system in addition to the heat pump. This is especially important if you live a cold climate.

Tags: , ,
Posted in furnace, Heat Pump, Heating | Comments Off

Fort Worth HVAC Contractor Guide: Signs of an Undersized Furnace

Friday, December 23rd, 2011

If you’re purchasing a new furnace for your Fort Worth home, you want to avoid buying one that is undersized for your particular space. To do that, here are some common signs that the furnace isn’t powerful enough for the heating needs of your home. These signs might appear for an older furnace as well, especially as it ages and loses its ability to provide adequate heat for your home.

Maintaining Temperature

The most common (and in many cases only) sign that your furnace is undersized is that the device simply doesn’t maintain the temperature in your home properly. This means that when turned on to full and left for a few hours, your furnace doesn’t heat your home to the thermostat setting.

This can be due to an improper load calculation or a load calculation that wasn’t taken at all. The perfectly sized furnace will heat your home evenly on the coldest day your area is likely to have. So, undersizing should be pretty evident – if it doesn’t heat your home evenly and it’s not exceptionally cold outside, you might not have enough BTUs under the hood.

How to Fix the Problem

The problem is one that varies depending on the severity of the undersizing. Modern furnaces are often available with two stages, meaning they can operate at both a low BTU rating (often around 40K or so) and a higher BTU rating (70K or higher). This is the perfect solution for homeowners worried about undersizing because it ensures that your home always has enough heat in reserve should the weather get exceptionally cold.

For example, most furnaces are sized for extremely low temperatures, but if the temperature jumps up to 50 degrees F outside, your furnace is now oversized for that weather. A two stage furnace offers solutions for both common conditions and extreme conditions and will resolve most of the concern you have about undersizing and not having enough heat to offset outdoor temperatures.

Tags: , , , ,
Posted in Heating | Comments Off

When Should You Replace Instead of Repairing Your Heating System in Fort Worth?

Sunday, November 27th, 2011

We all dread an expensive repair in Fort Worth, whether it is a car that needs a new transmission, a leaky roof that needs new shingles, or electrical wiring that has been chewed up by a wild animal. We often try and put bandages on things that we know should be replaced but we just can’t afford to replace them.

The same can be said about your home’s heating system. When your heat goes out or your home just doesn’t seem to be heating up to the setting on your thermostat, your first inclination is to check and see if it is running. Some people will put their hand over a heating vent to check for hot air while others may go into the basement or mechanical room to listen to hear if the furnace is running. Maybe there is a blockage in the ventilation system or a blown circuit breaker, two relatively easy fixes.

If the furnace isn’t working after checking the obvious symptoms, your next move is to call for service. Any qualified heating professional would be able to diagnose your problem and offer suggested repairs. Something relatively minor like a bad circuit board or blown fan motor are not real expensive repairs and are the best option versus replacing the furnace. And you may keep experiencing the same problem and getting the same repair work done – anything to avoid an expensive replacement.

But at some point the vicious cycle will come to an end. Your repair bills will begin to inch their way past the cost of replacing the furnace. You can only bandage a problem so long before it becomes “unfixable.” You may not want to pay an expensive replacement bill but consider the alternatives.

First is the obvious – it costs too much to keep repairing the furnace. Secondly, you never know when the furnace may break down and its failure to operate could have dangerous effects on the people in your home, especially if someone is sick. Third, your furnace may not be able to keep up with the heating demand due to lifestyle changes, i.e. an addition put on the house, carpeting removed and wood floors exposed, a new window, door, or skylight added, etc. Your old furnace may not have been designed to keep up with these changes and the repairs are only delaying the inevitable.

Ask yourself if everyone in your home is comfortable during cold weather. If most answer no, it may be time to consider replacing that old furnace with a new, energy efficient model that uses today’s technology – and leaves a smaller carbon footprint – to keep up with the demand for heat, in any sized building or home. Your decision to replace your old heating system could be as simple as the need to use modern technology to solve your indoor comfort problems.

Tags: , , , , ,
Posted in Heating | Comments Off

Air Source Heat Pumps: Some Pointers from Mesquite

Tuesday, November 15th, 2011

Most heating systems in Mesquite have as their main component some sort of heat generator, such as a furnace. These machines generate heat through some form of combustion, which obviously converts energy directly to heat, which is then distributed throughout the home. That’s a pretty simplified schematic explanation, but that’s more or less how most heating systems work.

Air source heat pumps are another type of heating solution; one that does not actually produce or generate any actual heat. There is no combustion. What an air source heat pump (ASHP) does instead is regulate the temperature of the home by essentially moving air around.

An air source heat pump use electricity to exchange indoor and outdoor air. Think of it like a more versatile air conditioner. In cooling mode, like an air conditioner, an ASHP will pump warm air from the inside out, using a system of refrigerant-filled coils and a compressor. By turning the ASHP to heating mode, the refrigerant flow is reversed, allowing the outdoor coils to extract heat from the outdoor air and pump it in higher concentrations to the inside.

If it seems like a simple system, that’s because it is. All the heat pump does is move heat either in or out, depending on what you need in the current season. Because this process generates no heat on its own, heat pumps can be very efficient. ASHP efficiency has been estimated at 150% to 300%, meaning that the heat energy produced is up to three times as much as the electricity used. That makes for a very efficient home heating and cooling solution.

Air source heat pumps are not necessarily right for every situation, however. In colder climates, where temperatures drop below 30 degrees Fahrenheit for stretches at a time, a heat pump will likely not be able to keep up on its own. In these situations, you may either need to supplement the ASHP with an additional heating source, or use a different system altogether. Newer so-called “cold climate” heat pumps may also be an option. Under ideal circumstances, an air source heat pump can act as a complete home heating system, as well as providing heat for hot water.

If you are looking for a simple and efficient home heating solution, look into whether an air source heat pump can work for you.

Tags: , , , , ,
Posted in Heat Pump | Comments Off

What Do the Energy Stars Indicate? A Tip from Euless

Tuesday, October 11th, 2011

If you’re in the market for any type of appliance for your Euless home, you’ve probably come across some that boast an Energy Star certification. But what does this really mean? After all, there are all types of special labels that manufacturers put on their products to make them look better, so how can you know which ones are really worth paying attention to?

Why Energy Star Matters

The truth is that no matter what type of appliance you’re looking for, from a coffee maker to a new furnace, buying one with the Energy Star label is definitely a good investment. This certification is conferred by the Environmental Protection Agency (EPA) and it can only be used on products that pass the EPA’s stringent tests for energy efficiency and environmental impact.

Energy Star products create fewer pollutants like greenhouse gasses because they use less energy to get the job done than their inefficient counterparts. This is great for our planet, but it also translates to savings for you as a consumer. Because Energy Star appliances use less energy to heat or cool your home or do whatever else you need them to do, your monthly bills will be significantly reduced.

Quality and Performance Measured

And you don’t have to worry about inferior performance as a result of increased energy efficiency either. Energy Star products can only receive the label if they provide all of the features you’ve come to expect from comparable products across the board. They need to maintain high energy efficiency ratings while still maintaining a superior level of performance.

While it’s true that you may wind up paying a bit more for an Energy Star product, that is only a one-time cost. If you compare the monthly savings you’ll receive by using your Energy Star appliance on a regular basis to what you would pay out over time with a less efficient model, it’s easy to see how the Energy Star product costs you less.

For all of these reasons, the Energy Star rating is definitely worth looking out for when shopping for home appliances and equipment. These products are made to be reliably energy efficient and can save you a ton over the years as long as they’re properly cared for.

Tags: , , , , ,
Posted in Energy savings | Comments Off

Humidification/Dehumidification in McKinney

Thursday, August 11th, 2011

Most people don’t think much about the humidity in their McKinney home unless it gets unbearably high in the summer or extremely low in the winter. However, even slightly low or high humidity levels can have a huge impact on your indoor air quality, so even if you feel comfortable most of the time, a humidifier or dehumidifier is something you should look into. Many homes have humidity problems, and even if it’s not something you notice on a regular basis, air that’s too moist or too dry can have a large impact on your family’s health and the overall quality of your indoor air.

The Risks of High and Low Humidity

There are many reasons that proper humidity in your home is so important. For one thing, air that’s too humid promotes the growth of things like mold and dust mites that are significant airborne allergens. Without enough moisture, however, mold and dust mites can’t grow, so if you keep your indoor humidity below 50%, you’ll likely never need to worry about these allergens disrupting your family’s health or causing damage to your furniture.

But, dry air isn’t much better. Once the humidity level gets below 35%, a number of negative things can happen. Dry air enhances the symptoms of asthma, colds and allergies, and it causes damage to the wood fixtures and furnishings in your home. Even if it doesn’t do so much damage, dry air is simply uncomfortable, causing dried out skin, eyes, and hair.

Why Humidity Control Matters

Even if you have a state of the art air quality system installed in your home, humidity is very much something you need to be concerned about. Air that’s too moist or too dry can actually make it more difficult for indoor air cleaners and filters to get those contaminants out. In effect, poor humidity control makes every aspect of your air quality worse.

So if you want to be sure you’re getting the most possible out of your indoor air cleaner, the best thing you can do is put in a good humidification system as well. And when you’ve done that, you may even find that you can turn down the heat and air conditioning as well. Properly humidified air makes home heating and cooling more efficient, saving you both money on your monthly energy bill and wear and tear on your system. No matter how you look at it, proper humidity control is good for you and your home.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

What Is the Energy Star Label?

Saturday, June 25th, 2011

Any time you go out and buy any type of appliance, you probably notice that some have a distinct mark that signifies them as Energy Star appliances. That sounds like a good thing, of course, but what does it actually mean? Should you always buy an Energy Star model over another type?

The Energy Star label was originally developed to help consumers more easily recognize appliances that are more energy efficient than the average. In order to obtain an Energy Star seal of approval, any device must meet very strict guidelines when it comes to energy efficiency.

What that translates into for you as a consumer is a lower monthly energy bill when you buy Energy Star appliances. Of course, once they have obtained an Energy Star labels, manufacturers can charge whatever they want for their product, and it is not unusual to pay more for a model that is certified an Energy Star.

However, as long as the potential savings over time that you will get by using the Energy Star model as opposed to one that is not as energy efficient outweigh the difference in initial purchase price, it is worth it to spend a bit more on the Energy Star model.

Keep in mind, though, that just because a produce meets the Energy Star guidelines for energy efficiency does not necessarily mean that it is a superior product in terms of quality or overall effectiveness. Plus, not all Energy Star appliances are created equal. You should still do your research and pick out the product that will both save you the most money and has the best chance of getting the job done right.

Another benefit to Energy Star products is that, because they use less energy when they run, they also have a smaller impact on the environment than a model that uses a greater amount of energy to perform the same tasks.

Overall, it is definitely worth taking a closer look at all of the Energy Star options out there when you are purchasing an air conditioning system or any other type of appliance. Using less energy is always a good thing both for your bank account and for the planet. But you also want to make sure you are actually getting the best product for your money.

Tags: , , ,
Posted in Air Conditioning | Comments Off