Posts Tagged ‘Garland’

Garland HVAC Tip: How to Maintain High Efficiency Filters to Reduce Stress on Your Heat Pump

Monday, January 2nd, 2012

The filter on your heat pump is an integral part of your Garland home’s comfort system. Without that filter, the device will quickly be subjected to an influx of debris and contaminants that can get into the machinery and the air being filtered into your home. As a result, you need to make sure you properly maintain the filters to reduce stress on your heat pump.

Change Your Filters

High efficiency filters are designed to remove as much of the airborne contaminants in the air as possible. This is fantastic for keeping your indoor air clean. But if you don’t properly maintain the filter, air quality can worsen and your heat pump is put under unnecessary stress. Specifically, the extremely tight knit filter, designed to stop nearly anything from getting through, gets clogged.

Now your heat pump is forced to work much harder to draw the air it needs from outside and heat or cool your home. On top of that, the filter is filled with contaminants that can start to leak back into the air supply, actually making your indoor air quality worse than it would be otherwise. That’s why it is so important to clean your filters on a regular basis (for permanent filters) and replace them if they are one time use.

Recommended Filters

You have options as to which types of filters you use for your heat pump. Filters come in multiple options, from super high MERV rated filters that trap up to 99% of all contaminants as small as 0.3 microns.

Electrostatic filters are especially efficient because they extract contaminants of all types – from dust and mold to smoke and gas fumes. A good filtration system should effectively remove anything from the air without needing replacement too often.

Permanent filters tend to offer the best protection against airborne contaminants and generally need to be cleaned once a month. HEPA filters are often permanent and while each filter is different, these are often extremely effective at minimizing contaminants in the air without putting stress on your Garland home’s heat pump.

Tags: , , , , , ,
Posted in Heat Pump | Comments Off

How to Clean a Heat Pump: A Guide from Garland

Saturday, November 19th, 2011

It is very important to keep your Garland home’s heat pump clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your home maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your heat pump. It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape.

Tags: , , , , ,
Posted in Heat Pump | Comments Off

What Is Forced Air Heating? A Question from Carrollton

Thursday, November 10th, 2011

Chances are that you’ve heard the term forced air heating before, particularly if you’re in the market for a new home heating system in Carrollton. But what does that actually mean? The truth is that if you’re asking this question, you’re not alone. There are so many types of home heating systems out there that it’s common to be a bit confused and overwhelmed by it all.

The truth is that a forced air heating system is simply a heating system that distributes heat throughout your house using air to carry it. In this type of system, heated air travels through a system of ducts and is expelled through vents into the different rooms and areas of your home in order to maintain a particular temperature. That temperature, of course, is whatever you set your thermostat to, and when the desired temperature is reached, the heat will shut off until the temperature drops down again.

The main difference between the different types of forced air heating systems is the type of equipment that heats the air. For instance, you could have a gas furnace, an electric furnace, a heat pump or a hydronic coil. All of these are capable of heating air, and when paired with a fan, blower or air handler, can distribute heated air throughout your home.

Many forced air heating systems are remarkably energy efficient and can effectively keep you home comfortable all winter long. Additionally, they are generally made to be incorporated with central air conditioning systems for year round temperature control. Heat pumps are especially convenient in this way, as they’re able to both heat and cool your home depending on the season and your home comfort needs.

Particularly if you already have ductwork in place or if you’re choosing a heating system for a new construction home, it can make a lot of sense to opt for some type of forced air heating. However, if you’re looking to replace an existing heating system in a house that doesn’t already have ductwork in place, the need to put it in can add a lot to the overall installation costs of the system.

Tags: , , , , , ,
Posted in Heating | Comments Off

Plants & Indoor Air Quality: A Tip from Dallas

Tuesday, October 25th, 2011

In our Dallas elementary school, we were taught that plants are the “lungs of the Earth.” They remove carbon dioxide from the air and release oxygen, which is great because it is the exact opposite of our respiratory process. They also clean the air in the process, like natural air pollution scrubbers, improving the quality of the air around them.

Given this, it’s not surprising that people have sought to harness the respiratory power of plants to improve air quality in their homes. One study by the National Aeronautics and Space Administration (NASA) in the 1980s even identified the best plants for improving indoor air quality.

This seems like great news for people who suffer from asthma or allergies, or who just want a natural way to purify the air in their homes. However, plants are not without their drawbacks. It is not a simple as to just bring a plant into the home. A plant is really an entire ecosystem, with many other organisms latched on for dear life. There are bacteria in the soil, for one, and there may be bugs or fungi in the soil or on the plant that you can’t even see.

Most of these are harmless, but not always. The fungus can be a problem, for example, if the spores get into the air. This can make allergies and asthma worse, not better.

That doesn’t mean you have to toss out that nice spider plant or Boston fern in the garbage, however. After all, it is probably doing a great job of filtering out some inorganic pollutants, it’s increasing the oxygen concentration of the room and it looks nice. Instead of getting rid of it, just give it a partner.

Adding an air cleaner like a fan with a filter can help purge the organic gunk that may be coming from the plant, while the plant is taking care of the other stuff. The result is cleaner, better air, which can be a relief to asthma and allergy sufferers.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

My HVAC System Has a 10 Year Warranty – Why Do I Need a Maintenance Agreement?

Wednesday, July 13th, 2011

While every new furnace sold comes with a limited 10 year warranty for the unit and parts, it is a good idea to supplement your warranty with a more complete maintenance agreement with your HVAC provider. Why pay for a secondary maintenance plan when you already have a warranty?

For the most part, the limited warranty provided by the manufacturer is meant to cover things like faulty parts, abnormal breakdowns or recalls. If your system simply needs to get a checkup because you use it a lot or there is a clog that isn’t caused by the actual furnace or air conditioner, you will likely end up paying the maintenance cost. So, by paying for an upgraded service plan, you cover all potential breakdowns and you’ll never again need to worry about your system. It’s like getting the upgraded warranty for a new car that covers everything from a busted crankshaft to old windshield wipers.

Help Your System Last Longer

Another benefit of a maintenance agreement for your HVAC system is that the system lasts longer when it is regularly maintained. The best maintenance agreements come with unlimited checkups and service visits, any day of the week, any time. So, if you think your system is running poorly, call a professional in to check it out and it won’t cost you anything. The ability to do this will ensure your HVAC system lasts significantly longer than if you were forced to wait until you could afford an extra visit from your repair man.

So, not only do you ensure your system keeps working, you add a lot of valuable years to its lifespan. Imagine how much money you’ll save if your furnace or air conditioner lasts for 20+ years instead of just 10. Any breakdowns after the 10 year mark would require hefty repairs or replacement since your warranty is expired. So, it’s in your best interest to keep your system running smoothly throughout its lifespan.

Ultimately, an HVAC system is only as good as what you put into it. If you’re careful about your investments and are willing to spend a little extra now, you’ll stand to benefit far more in the future from a smoothly operating, efficient heating system.

Tags: , , , ,
Posted in Engergy Savings | Comments Off

What Is the Energy Star Label?

Saturday, June 25th, 2011

Any time you go out and buy any type of appliance, you probably notice that some have a distinct mark that signifies them as Energy Star appliances. That sounds like a good thing, of course, but what does it actually mean? Should you always buy an Energy Star model over another type?

The Energy Star label was originally developed to help consumers more easily recognize appliances that are more energy efficient than the average. In order to obtain an Energy Star seal of approval, any device must meet very strict guidelines when it comes to energy efficiency.

What that translates into for you as a consumer is a lower monthly energy bill when you buy Energy Star appliances. Of course, once they have obtained an Energy Star labels, manufacturers can charge whatever they want for their product, and it is not unusual to pay more for a model that is certified an Energy Star.

However, as long as the potential savings over time that you will get by using the Energy Star model as opposed to one that is not as energy efficient outweigh the difference in initial purchase price, it is worth it to spend a bit more on the Energy Star model.

Keep in mind, though, that just because a produce meets the Energy Star guidelines for energy efficiency does not necessarily mean that it is a superior product in terms of quality or overall effectiveness. Plus, not all Energy Star appliances are created equal. You should still do your research and pick out the product that will both save you the most money and has the best chance of getting the job done right.

Another benefit to Energy Star products is that, because they use less energy when they run, they also have a smaller impact on the environment than a model that uses a greater amount of energy to perform the same tasks.

Overall, it is definitely worth taking a closer look at all of the Energy Star options out there when you are purchasing an air conditioning system or any other type of appliance. Using less energy is always a good thing both for your bank account and for the planet. But you also want to make sure you are actually getting the best product for your money.

Tags: , , ,
Posted in Air Conditioning | Comments Off

What Can You Do Yourself if Your Central AC Unit Does Not Work? When Should You Call a Professional?

Thursday, June 23rd, 2011

If your air conditioning system suddenly stops working or is not keeping your house as cool as you think it should, the chances are good that you will have to call in a professional to make the necessary repairs and get you back on track. However, there are a few things you can do on your own before you make that call to ensure that this really is something you cannot take care of on your own.

While it may seem obvious, the first thing you should check is the thermostat to make sure that it is set to a temperature that will trigger the air conditioning to come on. If your thermostat for some reason is set too high, then the air conditioner will not receive the signal to start cooling the house. This is an easy fix, of course, and you will be back up and running in no time.

If the thermostat is indeed set where it should be, the next thing to check is the air filter. Most people with central air conditioning know that they should change the filter once every month or so, but this seldom actually happens.

If it has been a while since your air filter was changed, there is a good chance that it is clogged and therefore blocking air from circulating from the air conditioner through the rest of the house. This is an easy enough fix, as all you need to do is replace the current air filter and your system should be able to pick up right where it left of. However, if the blocked air filter has also caused ice to form behind it, you may have to wait for a couple of hours until the ice has a chance to thaw.

Next, you will want to check and make sure that the air conditioning system is actually getting power. Look to see if any of the breakers are tripped or if there may have been a current interruption for any other reason that is within your power to fix. If this is the case, though, it is a good idea to turn the air conditioning system off before you attempt to restore the power.

If none of these measures are able to get your air conditioning system up and running again, you should not hesitate to call a professional. Many air conditioning repairs are quite basic, but they still need to be performed by a licensed professional.

Tags: , , , ,
Posted in Air Conditioning | Comments Off

Ductless vs. Duct Air Conditioning Systems

Wednesday, June 15th, 2011

When it comes time to pick out a new air conditioning system for your home, you will have to make the choice between ductless and duct models. While both of these types of systems have their advantages, the specifics of your situation will go a long way to determining which one is right for you.

Ductless air conditioning systems are becoming more and more popular these days for a number of reasons. For one, they are generally considered more energy efficient than their ducted counterparts. Also, ductless systems are often cheaper and simpler to install, particularly in a house that does not already contain ductwork.

These types of air conditioners use refrigerant lines to connect the indoor unit or units to the outdoor compressor. The refrigerant lines take up much less space than ducts do and they also are much easier to install. Refrigerant lines can also reach into areas of your house that ducts may not be able to, making it possible for you to bring the benefits of air conditioning to places that did not have access to it before.

The indoor unit of a ductless air conditioning system can generally handle the cooling load of one or two rooms, but if you want to cool a larger space, it will be necessary to install multiple indoor units throughout the house. All of these units can connect to the same outdoor compressor and they can also be controlled individually. That means that you can set different temperatures in different parts of your house and you do not have to pay to cool the entire space if no one is occupying certain parts at the moment.

A duct air conditioning system also involves indoor and outdoor components. However, these elements are connected to each other by a system of ducts rather than by refrigerant lines. In a duct system, cooled air is brought inside from the compressor and then circulated through various ducts by the air handler.

The latest duct systems are quite energy efficient as well, and they can also be coupled with zone control systems to create different climate zones within your house. Particularly if you already have some ducts in place, a duct air conditioning system can be a great option for you.

Tags: , , ,
Posted in Air Conditioning | Comments Off

Indoor Air Quality – To Zone or Not to Zone my Home Comfort

Thursday, April 21st, 2011

There are a lot of decisions to make related to your home comfort system. You must decide what type of heating you want, how you’ll implement air conditioning, and then how to keep all of that heated and cooled air clean and healthy in your home.
On top of everything else, you have the option to implement zone control in your house to provide multiple comfort levels for each member of your family. Zone control systems are growing rapidly in popularity because they allow home owners to enjoy an enhanced level of comfort throughout the day, while not negatively impacting any one person.
For example, if it’s chilly outside and you need to turn your heater on, that doesn’t mean everyone in the house wants the thermostat set to 72°F. There are a few reasons for this. You may be in the kitchen, working over the stove or doing dishes where there is plenty of heat to keep you warm. More warm air coming through vents or radiators isn’t going to make you comfortable.
The second floor of a home traditionally needs less heat because warm air on the first floor rises and fills that space. The same is true in the summer when cool air settles in lower floors. Having a zone control system allows you to set specific temperatures in each room which are then controlled by your home heating system. You can even turn off the heating and cooling in a specific room like your office or the attic if it will be empty for long periods of time.
Other Considerations
A zone control system is good for comfort, but also for the overall air quality of your home. Too much conditioned air moving through your ducts carries more allergens and contaminants into your home and causes your air quality system to work harder. Your ventilation system will be asked to work harder as well.
Ideally, a good home air quality system is designed to use as little conditioned air as possible to keep everyone comfortable. A zone control system does this very effectively. When talking to a professional about a new installation, check to find out about programmable thermostats as well. These can make it easier to set and forget the temperature in rooms that are only used for a few hours each day.

Tags:
Posted in Indoor Air Quality | Comments Off

Propane, Oil or Natural Gas: Which One Should I Choose?

Friday, April 15th, 2011

In most cases, you’ll have a choice concerning what type of fuel you’d like your furnace to burn. For most people, this choice comes down to propane, oil or natural gas. The one you choose could significantly impact the cost of heating your home for many years to come, but it’s usually a pretty clear cut decision.

One thing to remember is that most furnaces that burn natural gas can also burn propane. If you don’t yet have a propane tank but are considering getting one, you might not have to make a final decision just yet. Although it’s generally better to set up your furnace for one type of fuel and then leave it that way, you will likely still have the option of converting later on if you should choose to.

If you do have access to natural gas, though, that’s probably going to be your best option. Furnaces that burn natural gas or propane are generally much more efficient than any other type of furnace on the market. You can get them with annual fuel utilization efficiency (AFUE) ratings as low as 80% and as high as 97+%, so that ensures that you’ll be able to find the one to fit your specific situation.

If you’re facing particularly harsh and frigid winters, you’ll want to choose the most energy efficient option available to you and that’s pretty much always going to be a natural gas furnace. Of course, when you’re looking to decide between natural gas and propane as a fuel source, you’ll just want to compare the relative cost for each in your area. For some people natural gas is cheaper, while it’s propane for others. And since your furnace will operate at the same efficiency no matter which of these fuels you choose, you just need to choose the cheapest.

Oil is certainly an option as well, but if you’re looking for a very high efficiency furnace, you’re not going to find one that burns oil. That doesn’t mean that an oil burning furnace might not be a good investment for you. If you don’t have access to natural gas in your area and your heating load isn’t that high, oil might be a perfectly economical choice for you.

If you do opt for a super high efficiency furnace, but don’t have access to natural gas lines, propane is probably the way to go as opposed to oil.

Tags:
Posted in Heating | Comments Off