Posts Tagged ‘Lantana’

« Older Entries

Getting a Heating Upgrade for Your Mesquite Home? Consider a Home Energy Audit First

Monday, April 16th, 2012

Considering an upgrade to your Mesquite home’s heating system? It’s usually a sound investment that generates savings both in heating costs and repair bills, plus it keeps your family happy and comfortable.

Before you take the plunge on new equipment, though, you may want to get a home energy audit. What you find may help you choose the right system.

A home energy audit is essentially an inspection by a professional of the materials used to insulate your home. This includes not just the insulation in the walls, but also the walls themselves, along with windows, doors and so on. The idea is to figure out how much heat is escaping your home to the outside, so an audit may also include looking at ducts, vents or anywhere else where air could flow through.

So what does an energy audit have to do with a new heating installation?

Think about it like this. There are two ways to make your home warmer: increase heat gain (e.g., get a more efficient heating system) or decrease heat loss. If you are able to do the latter, you may find that the former is unnecessary.

For example, you may get an energy audit and discover that by installing new windows and resealing your doors, you can increase heating efficiency by 10%. This could have big implications for your decision to get a new heating system, as you may decide that you can save money by getting a smaller capacity furnace. Getting the right size furnace is very important; one that is too small will not be able to heat your home to the desired temperature and one that is too large will short-cycle, which leads to uneven heating and wears down your system quickly.

A home energy audit is the first step to getting a new heating system, and one that is sure to save you money. Give A#1 Air a call to set up an energy audit today!

Tags: , ,
Posted in Energy savings, Heating, Heating Installation | Comments Off

Why Routine HVAC Maintenance Improves for Frisco Homes

Wednesday, March 28th, 2012

Furnaces and air conditioners in Frisco are by far the most common way to circulate air throughout homes, offices and institutions, heating in the winter months and cooling in the summer.  Adjust the thermostat and controlled air is delivered almost immediately.

If a system is not regularly and properly maintained, however, that air can be dirty, dusty and full of odor, having passed through the heat exchanger, filters and ductwork that have accumulated a build-up of residue over time.  IAQ or interior air quality quickly deteriorates.

The Basics

HVAC systems heat or cool air at a central point, often a furnace in the basement.  The air passes through filters to sift out dust and unwanted particles, then travels through a system of ductwork to be delivered to the space.  Return air ducts bring it back to the central point.

Along the way, the air accumulates the dust, germs and debris of the places it inhabits.  Over time, the filters become clogged and eventually contribute more contamination to the processed air than they can clean.  The enclosed and hard to reach ducts are also deposits of dust and decorated with spider webs that are quickly another form of filter that gives back more than it receives.

The Costs

Without routine heating or air conditioner maintenance, the system runs poorly and distributes more dirt into the living space than it is able to filter and clean, reducing the quality of life for the inhabitants, homeowners, businesses and customers.  Poor air quality can lead to serious health issues as well as the loss of time and productivity.

Not only does the quality of the air decrease, the strain on the system lowers efficiency.  Having to work harder consumes more energy, creating an immediate and noticeable rise in utility bills.  The stress also reduces the lifetime of the system and requires more rapid replacements of parts or the entire furnace, a huge financial cost.

Regular Maintenance is the Easy Solution

To maintain high levels of quality air, it is essential to schedule regular replacements of filters and a clean-out of the ducts.  The filters are accessible as part of the furnace and air conditioners and easily swapped out by the home owner once or (better) twice a year.

Ductwork, however, is enclosed and often out of site, just as easily out of mind and certainly harder to reach.  Call A# 1 Air, schedule a duct-cleaning session along with an inspection and routine maintenance of the entire system with a licensed company such as A #1, and ensure longevity and efficiency along with peace of mind.

Tags: , ,
Posted in Air Conditioner Maintenance, Air Conditioners in Frisco, Air Conditioning | Comments Off

Comparing High-Efficiency and Mid-Efficiency Furnaces: A Guide from Highland Park

Tuesday, February 28th, 2012

Whenever you are in the market for a new furnace for your Highland Park home, there are many models to choose from.  Many of the furnaces manufactured within the last few years are high-efficiency furnaces with a high AFUE rating (AFUE measures the amount of fuel the furnace converts into heat). When people refer to a mid-efficiency furnace, they are usually talking about older furnaces.

Single-stage furnaces were considered to be an efficient heating system when they were manufactured, but compared to newer furnaces, they use up a lot more energy than they need to. Single-speed furnaces are designed to run at full capacity until the temperature inside the home reaches the thermostat setting. After they shut off, the home not only loses heat, but the furnace will also take longer and burn more fuel when it cycles on again.

Newer, two-speed and multispeed models run consistently at lower speeds, and the ones with variable-speed blowers are even more efficient because they can operate at various levels. These models will also automatically adjust to the thermostat to maintain a constant temperature, which saves energy by keeping the home at a consistent temperature so that there’s little heat loss.

When shopping for a new furnace, keep in mind that the AFUE ratings for multispeed and variable-speed furnaces only determine the efficiency of the actual furnace. If you are upgrading your old, mid-efficiency furnace to a high-efficiency furnace, you should make sure that your Highland Park home is properly insulated and sealed.  You could also consider upgrading any older doors and windows to more efficient double-paned ones, or you can also install storm doors and windows.  Call A#1 Air

Tags: , ,
Posted in Engergy Savings, Furnace Installation, Heating | Comments Off

How to Handle Your Finicky DeSoto Heat Pump

Thursday, January 5th, 2012

A heat pump is designed to keep your DeSoto home comfortable. Warm weather, cold weather – it doesn’t matter. It should turn on when you need it and turn off when you don’t. So, when the device starts turning on and off without reason or when you need it to stay on, what exactly is the problem and how can you fix that problem without losing the heating or cooling capacity of your device.

Common Causes of the Problem

There are a number of reasons why your heat pump would turn off shortly after turning on, and most of the time this occurs in heating mode. If it occurs in cooling mode, you should have the device inspected immediately because there is likely something wrong with a core component like the compressor. For heating mode issues, here are some common problems:

  • Dirty Coils – If the coils are dirty, the device won’t be able to properly operate, especially if it has been some time since the last cleaning. Both sets of coils need to be cleaned at least once a year to avoid this becoming a problem.
  • Low Refrigerant Charge – If the refrigerant gets low, you’ll need to have it recharged because the pressure in the device will drop and it will therefore turn off after a few minutes of use.
  • Defrost Timer – If the defrost timer is forcing the device into a defrost cycle too often (usually it is set to 30, 60, or 90 minutes), the fan might turn off every few minutes after turning on. This is a common problem and is usually due to a thermostat or switch issue which can be fixed relatively easily.

Another thing to ask yourself when this problem occurs is whether the device is heating properly when on. Defrost timer issues don’t usually impinge on the heating ability of the device, while low refrigerant can. You want to make sure the device is working properly when on and not just cycling on and off without heating capacity.

Based on what you find, you’ll need a DeSoto HVAC technician to take a closer look and ensure everything is working properly. Most repairs for this type of problem are relatively simple.

Tags: , , , , ,
Posted in Heat Pump | Comments Off

Garland HVAC Tip: How to Maintain High Efficiency Filters to Reduce Stress on Your Heat Pump

Monday, January 2nd, 2012

The filter on your heat pump is an integral part of your Garland home’s comfort system. Without that filter, the device will quickly be subjected to an influx of debris and contaminants that can get into the machinery and the air being filtered into your home. As a result, you need to make sure you properly maintain the filters to reduce stress on your heat pump.

Change Your Filters

High efficiency filters are designed to remove as much of the airborne contaminants in the air as possible. This is fantastic for keeping your indoor air clean. But if you don’t properly maintain the filter, air quality can worsen and your heat pump is put under unnecessary stress. Specifically, the extremely tight knit filter, designed to stop nearly anything from getting through, gets clogged.

Now your heat pump is forced to work much harder to draw the air it needs from outside and heat or cool your home. On top of that, the filter is filled with contaminants that can start to leak back into the air supply, actually making your indoor air quality worse than it would be otherwise. That’s why it is so important to clean your filters on a regular basis (for permanent filters) and replace them if they are one time use.

Recommended Filters

You have options as to which types of filters you use for your heat pump. Filters come in multiple options, from super high MERV rated filters that trap up to 99% of all contaminants as small as 0.3 microns.

Electrostatic filters are especially efficient because they extract contaminants of all types – from dust and mold to smoke and gas fumes. A good filtration system should effectively remove anything from the air without needing replacement too often.

Permanent filters tend to offer the best protection against airborne contaminants and generally need to be cleaned once a month. HEPA filters are often permanent and while each filter is different, these are often extremely effective at minimizing contaminants in the air without putting stress on your Garland home’s heat pump.

Tags: , , , , , ,
Posted in Heat Pump | Comments Off

Coppell Heating Tip: What to Expect in a Low, Medium or High Efficiency Furnace

Thursday, December 22nd, 2011

When buying a new furnace in Coppell, you have many options. You can purchase a low end model to save money up front and you’ll still get exceptional fuel efficiency, but as you go up the scale, more innovative, money saving features become available. Here is a brief look at what you can expect based on which type of furnace you purchase.

Low Efficiency Furnace

This is a bit of a misnomer as even entry level furnaces have efficiency ratings of at least 80%. For comparison, if you’re still using an old gravity furnace, your efficiency rating could be lower than 50%. Modern furnaces are built to conserve, and while you won’t receive all of the bells and whistles that tend to accompany high efficiency models, you will get a durable, affordable furnace that will last a long time.

Medium Efficiency Furnaces

Furnaces in the mid-efficiency range have AFUE ratings of between 85% and 92% and are therefore significantly better than those in the entry level range. They also have some of the higher end features available in high efficiency models like programmability and the option for zone control. Because they are still mid-range, they are affordable without skimping too much on features too – a must for any homeowner wanting to save money on both ends.

High Efficiency Furnaces

The highest efficiency furnaces on the market are very different from those you would have purchased even just 10 years ago. Top end furnaces can carry AFUE ratings of up to 95% with a boat load of added features to conserve energy. These features include two stage gas valves so you can maintain a low BTU heating system for most of the year but crank up the heat when the temperature outside drops too low. They are also programmable, which allows you to easily change the temperature settings, fan speed and more from anywhere in the house.

And while they cost more to install, high efficiency furnaces use less energy over their lifespan, last longer and are more environmentally friendly than any other furnaces on the market today.

Tags: , , , , ,
Posted in Heating | Comments Off

Lantana Heating Contractor Tip: What to Do When Your Furnace Fan Doesn’t Run

Tuesday, December 13th, 2011

There are several reasons that a furnace fan might stop working at one point or another. While many of these do require a Lantana heating contractor’s attention, there are probably some things you can check on your own before you go and call in the pros. After all, if you can address the problem on your own, it will at least save you from having to pay a technician to come out.

The first thing to check when your furnace is running but the fan isn’t turning is whether or not the fan is actually switched on. Certain models of furnaces have a separate switch to turn the fan on and off. While there is probably no reason that you would want to turn off the fan by itself, it’s worth taking a look just in case. If that really is the problem, you’ll be up and running and back to dealing with better things in no time.

If that’s not the problem, you might try looking to see if any wires leading to the fan are loose or the fuse is blown. If the fan has no power, of course, it won’t be able to work but the rest of the furnace likely would work just fine as long as it doesn’t run on electricity as well.

Of course, the problem very well may be beyond your power to solve on your own. Don’t despair though. Even though you need to call in a professional, that doesn’t mean that the problem will be expensive to fix. In fact, it may be as simple as replacing your thermostat or the motor for the fan itself.

Just because a fan isn’t working doesn’t mean that you’re going to be paying an arm and a leg to have work done on your furnace. If you can’t easily discover the problem on your own, however, or if you’re not comfortable inspecting this type of equipment at all, you’re generally better off just calling in an expert and letting them do the dirty work for you. Paying for simple furnace fan repairs is definitely preferable to having to pay someone to fix the fan and the stuff you broke yourself while trying to fix the fan on your own.

Tags: , , , , ,
Posted in Heating | Comments Off

A Tip from Lancaster: Components of a Heat Pump

Thursday, December 8th, 2011

As every Lancaster HVAC contractor knows, heat pumps have relatively few components. However, these components do not work the way you might expect, if you are picturing, for example, a fan that blows heat in or out.

A heat pump operates on the same principle as an air conditioner or refrigerator, which may seem complicated at first, but it’s not. The heat pump consists of five main functional components, which are outlined below:

  1. The coils absorb heat from the surrounding air and channel it in or out of the home. There are two different types of coils in a heat pump. Condenser coils are outside the home transferring heat to and from the outside air. Evaporator coils are the reverse, transferring heat to and from the air inside the home.
  2. The coils are filled with a refrigerant, which is the medium that carries heat into or out of the home. On a cold day, for example, when the heat pump is in heating mode, the refrigerant in the condenser coils will absorb heat from the outside air, the flow inward into the evaporator coils, warming the interior of the house.
  3. The compressor pressurizes the refrigerant so that it is able to readily absorb as much heat from the air as possible. This is how your heat pump is able to gather warm air from the chilly outdoors to keep your home warm.
  4. The reversing valve is the component that changes the flow of the refrigerant when switching from heating mode to cooling mode, or vice versa.
  5. Finally, the air handler is the fan component that distributed the heat throughout the house via your home’s ductwork.

While these are the five main components, there are several smaller parts involved within and alongside each of these, as well. You need not concern yourself with them, since you won’t have occasion to interact with them. A heating contractor will be able to identify and repair any of the components of a heat pump as needed.

In addition to these five primary components, most heat pumps also include a heater pack, which is a bunch of actual heating elements for use when the heat pump cannot operate on its own. For example, you would turn on the “Emergency Heat” setting of your heat pump after a power outage to warm the refrigerant before use. That setting is supported by the heater pack.

Tags: , , , ,
Posted in Heat Pump | Comments Off

How a Thermostat Works: A Guide from Lantana

Thursday, October 20th, 2011

Your thermostat is designed to closely monitor and maintain the temperature in your Lantana home. When you flip the switch, you want your furnace or air conditioner to respond immediately. So, it’s a good idea to learn how it works so that if there is a problem, not only will you know better what needs to be fixed – you can decide whether to call a professional in for help.

Thermostats shouldn’t need input from you other than to set the initial temperature. From there, they are automatic switches. A thermometer inside the thermostat measures the indoor air temperature. When it gets above or below the limit you’ve specified, it triggers the thermostat to send a message to your home comfort system and keep things nice and comfortable.

Types of Thermostat

Thermostats come in two forms –electromechanical and electronic. An electromechanical thermostat is the simplest and has been used for decades to regulate temperature in homes. It has a simple strip or coil of metal that expands as the temperature rises and contract as it lowers. A mercury thermometer is placed on top of the strip. The coil’s movements cause the vial to tip as the temperature changes. There is a pair of electrical contacts on either end of the vial. The mercury can absorb that electrical current when the electrical contacts touch the thermometer. The mercury then acts as a switch to turn on your comfort system.

An electronic thermostat simply has an electronic sensor that measures the indoor air temperature. You set a temperature for your room and when it changes significantly, the switch inside your electronic thermostat is triggered, causing it to turn on your comfort system.

Ways to Upgrade Your Thermostat

Most homes only need the bare minimum in their thermostats. However, there is some very exciting technology on the market these days that can add quite a bit of value to your system. Not only can you install a programmable thermostat, you can opt for zone control systems that allow multiple thermostats in different rooms of your home.

Programming allows you to set temperatures for certain times of the day. This is especially great if you are gone from the house for long periods of time each day. Why heat or cool a home when it is empty? And if you have multiple people with different temperature needs, zone control temperature control allows you to set specific temperatures for specific rooms in your home – a very enticing option for large families or multi-story homes.

Tags: , , , , ,
Posted in Energy savings | Comments Off

Why Are Cleans Filters So Important to AC Efficiency? A Question From McKinney

Saturday, September 24th, 2011

Air conditioners money to operate in McKinney – even more when they don’t work at 100% efficiency. So, it is important to perform the various regular maintenance tasks that ensure the system uses as little electricity as possible. The first thing on your list (and the easiest) is cleaning those filters.

Keeping Filters Clean

The Department of Energy’s Energy Savers website states that you can reduce your air conditioner’s energy consumption by as much as 15% simply by keeping the air filters clean. Why do they matter so much? Consider the nature of a filter.

The filter on your AC unit is designed to capture any dust, debris and sediment in the air supply. If that dust and sediment was allowed in, not only would it gum up the mechanical workings of the device, it would get into your ductwork and reduce the air quality of your home. So, filters are used to capture such things. However, when a filter gets clogged, the system must work harder to draw the air in. As it works harder, the motor turns faster and more electricity is used.

It takes very little to clog the filter of an AC unit, especially if it is running 24 hours a day for two or three months out of the year. So, it’s best to check your filters once every 30 days regardless of what type of filter you are using.

Which Filters to Check

The main filter on your AC unit should be checked along with any air handler filters and any air cleaner filters you have installed in your system. Another thing to consider is the condition of your home and the area around your outdoor condenser. If you have pets, lots of plants or your condenser is located in a dusty area, you may need to check and change those filters even more often.

Most filters are located along the return length of the ductwork – sometimes in ceiling ducts and walls, though they may also be located in your furnace’s air handler or inside the air conditioning unit. If you have window units or mini splits, the filters are frequently in the unit.

Clean air filters are important for your health, your wallet and the longevity of your AC system. Stay on top of them and you will save money in more ways than you might expect.

Tags: , , ,
Posted in Air Conditioning | Comments Off

« Older Entries