Posts Tagged ‘Richardson’

Coppell Heating Tip: What to Expect in a Low, Medium or High Efficiency Furnace

Thursday, December 22nd, 2011

When buying a new furnace in Coppell, you have many options. You can purchase a low end model to save money up front and you’ll still get exceptional fuel efficiency, but as you go up the scale, more innovative, money saving features become available. Here is a brief look at what you can expect based on which type of furnace you purchase.

Low Efficiency Furnace

This is a bit of a misnomer as even entry level furnaces have efficiency ratings of at least 80%. For comparison, if you’re still using an old gravity furnace, your efficiency rating could be lower than 50%. Modern furnaces are built to conserve, and while you won’t receive all of the bells and whistles that tend to accompany high efficiency models, you will get a durable, affordable furnace that will last a long time.

Medium Efficiency Furnaces

Furnaces in the mid-efficiency range have AFUE ratings of between 85% and 92% and are therefore significantly better than those in the entry level range. They also have some of the higher end features available in high efficiency models like programmability and the option for zone control. Because they are still mid-range, they are affordable without skimping too much on features too – a must for any homeowner wanting to save money on both ends.

High Efficiency Furnaces

The highest efficiency furnaces on the market are very different from those you would have purchased even just 10 years ago. Top end furnaces can carry AFUE ratings of up to 95% with a boat load of added features to conserve energy. These features include two stage gas valves so you can maintain a low BTU heating system for most of the year but crank up the heat when the temperature outside drops too low. They are also programmable, which allows you to easily change the temperature settings, fan speed and more from anywhere in the house.

And while they cost more to install, high efficiency furnaces use less energy over their lifespan, last longer and are more environmentally friendly than any other furnaces on the market today.

Tags: , , , , ,
Posted in Heating | Comments Off

How Much Will a High Efficiency Furnace Save Me in Richardson?

Sunday, December 11th, 2011

The furnaces you can buy these days in Richardson are all much more energy efficient than those available even 10 years ago. However, that doesn’t mean that all of the current models are created equal. There is still a pretty big variation when it comes to energy efficiency and when it comes to price, so you need to really know what you’re looking for if you want to get the best deal out there.

The first thing you should understand when you’re trying to pick out a furnace is how energy efficiency for this type of equipment it measured. All furnaces come with an annual fuel utilization efficiency (AFUE) rating that reflects just exactly how energy efficient they are.

Any furnace you buy today will have an AFUE of at least 80%, but it’s possible to purchase models with AFUEs of 97% or more. Of course, energy efficiency is generally a good thing, but there are some other things to consider when you’re trying to decide just how energy efficient you need your new furnace to be.

What this calculation really comes down to is how much you’ll be able to save monthly and annually with a higher efficiency furnace. While your heating bills will certainly be lower the higher the furnace’s efficiency is, you will also pay more up front for the highest efficiency models.

If you live in an area with relatively mild winters and you won’t be demanding a whole lot of your furnace, then the amount you’ll save each month with the highest efficiency models really won’t add up to much.

Keep in mind that a furnace with an 80% AFUE is still quite efficient and will almost certainly save you a considerable amount monthly when compared to the unit you’re currently using. And because 80% AFUE furnaces are so much cheaper than those with upper 90% AFUE ratings, they often wind up as the more cost effective alternative overall.

Tags: , , , , ,
Posted in Heating | Comments Off

Irving Contractor Tip: Heat Pump Noise Considerations

Tuesday, December 6th, 2011

Whenever you’re looking into replacing your Irving home’s heating system or installing a new one, there are many different factors you’ll have to take into consideration. The amount of noise that the system you choose will make is certainly one of these. And in addition to the amount of noise that this system will make, you’ll also want to make a note of where the unit will be placed and so where the noise will be coming from.

While you may have had to worry a bit about the noise generated by heat pumps in the past, it’s not something you’ll have to take into consideration this time around. That’s because newer heat pumps are designed to be quieter than ever, providing the same heating and cooling power with only a fraction of the noise of some earlier models.

In fact, the only part of a heat pump that really makes any noise at all is the outdoor unit. Unless this needs to be located very close to your home or to a window of a room that you use often, chances are that you won’t even hear it at all.

However, if you live very close to your neighbors or don’t have a lot of outdoor space, you may have to put the outdoor unit close to the walls of your home. Even then, though, you’ll hardly notice the noise your heat pump makes. Years of research and redesigning have produced some of the quietest heat pumps yet and that’s what you’ll be buying if you’re in the market for one of these systems now.

Newer heat pumps have been tweaked and adjusted to minimize the amount of noise-generating vibrations they produce. In fact, you’ll probably find that most of these units make no more noise than your refrigerator. They’re efficient and quiet and can keep your home comfortable all year long.

Tags: , , , , ,
Posted in Heat Pump | Comments Off

How Do Heat Pumps Work? A Question from Addison

Sunday, November 13th, 2011

If you’re in the market for a new home heating and cooling system in Addison, a heat pump is definitely an option worth considering. However, while the popularity of these systems is growing rapidly, many people still don’t understand what they’re all about. Before you go out and get yourself a new home comfort system, you should make sure you really know what you’re looking at

As their name suggests, heat pumps move heat from one location to another. However, their name can be misleading as well. Heat pumps are able to both heat your home in the winter and keep it cool in the summer by taking heat from the air in one place and sending it to another.

For example, your heat pump will remove the heat from your indoor air in the summer and pump it outside to keep your home cool. In the winter, the process is reversed, and the heat pump gathers heat from the outdoor air and pumps it inside to keep you house warm.

Of course, it’s not hard to see how the air inside your home in the summer has heat in it. But the outdoor air in the winter is cold. So how does a heat pump heat your house with cold air? Well, the truth is that there is almost always some heat in the air, no matter how cold it seems to you and me.

In fact, the temperature would have to drop well into the negative range before there was absolutely no heat to be found in the air. And heat pumps are specially designed to find that heat and collect it.

Basically all heat pumps work on this principle. However, they can’t keep your house comfortable all on their own. Heat pumps are usually installed as part of a complete home heating and cooling system. This means they’ll be paired with an air handler that can circulate the temperature controlled air throughout the house.

There are also some heat pumps that supplement the amount of heat they’re able to pull out of the air by heating it as it passes through. These types of heat pumps are often more effective in cooler areas, but because they require more energy to actually generate heat, they’re not typically as energy efficient as models that rely on their ability to get heat only out of the air.

Tags: , , , , ,
Posted in Heat Pump | Comments Off

Why Fall Maintenance is Important for Your Heating System: Some Advice from Grand Prairie

Tuesday, November 8th, 2011

When it comes to heating equipment maintenance and repairs, it does not pay to procrastinate. The longer you put off the maintenance, the higher the probability that your heating system will break down or your Grand Prairie contractor will be unable to make an immediate emergency repair when you need it. That’s why fall is the best time of the year to have maintenance and repair procedures performed.

Consider this: when do most people call a heating and cooling contractor? The answer: when they need a repair. The call could come in the middle of the night when a furnace stops working or during a family party on a weekend – both times when it is hard to find someone to do the repair work. Has this happened to you?

You can avoid this aggravation and extra expense by scheduling fall maintenance for your heating system. Fall is often the “slow season” for heating and cooling professionals and many schedule their routine service and maintenance appointments during this time. Contractors expect to be busy during the peak winter months and prefer to spread out the workload as evenly as possible.

Most heating and cooling contractors offer service or maintenance agreements, which lock in at least one or two visits a year for furnace or air conditioner inspection. It is rare to find a contractor who will schedule a furnace inspection during the cold winter months. They know that time is usually saved for people with real emergencies. If you don’t have a service agreement with a contractor, you may want to consider signing up for one and avoid the risk of waiting in line for a furnace repair in the dead of winter.

During fall maintenance, your heating equipment will be switched on and inspected. That may sound routine but by running your heating system early, you may be spared the expense of repairing your system when it fails to operate or run smoothly during the cold months. If there is a problem, it is better to fix it ahead of time.

There is no guarantee that a furnace that is tuned up in the fall will last throughout the winter without needing service. But a little preventive maintenance ahead of time will save a lot of heartache – and dollars – when a real emergency comes up.

Tags: , , , , ,
Posted in Heating | Comments Off

Surprising Sources of Indoor Air Pollution: A Guide from Addison

Sunday, October 30th, 2011

Indoor air pollution is a major problem for millions of homeowners throughout the country each year, including those in Addison. In fact, the EPA estimates upwards of 20 million households may have problems caused by mold, radon, humidity, exhaust or any number of other pollutant problems. However, not all of the indoor air pollutants out there are so obvious. Some are things you probably have in your home right now and don’t realize it. Here are some of the more surprising sources of indoor air pollution and what you can do about them:

  • Incense – Incense releases both carbon monoxide and benzene, two chemicals that are potentially harmful to human health. Cancer, skin irritation and asthma risks are all increased in people who spend a lot of time around incense.
  • Laser printers – Laser printers that use toner can release a number of harmful chemicals into the air. That toner is very fine and releases particles into the air that are equal to or in some cases worse than second hand cigarette smoke. If you have a laser printer, consider putting it in a well-ventilated, infrequently used space.
  • Kitchen Stove – If you have a gas stove, it releases Nitrogen Dioxide when on, an unsafe gas that is odorless and fills your home quickly. This gas is bad for respiration and can cause asthma attacks. To solve this problem, simply make sure you stove is ventilated properly when cooking.
  • Spackle – Old spackle – the kind used before the 1980s often contained asbestos which can still be there, waiting to be disturbed. Old asbestos, while not inherently dangerous, will become so if you start doing work in your home or if the spackle starts to wear away. To solve this problem either call an abatement firm or cover the offending wall with a new layer.
  • Drapes – Those drapes are filled with contaminants that cling there, especially if humidity is a problem in your home. Dust mites in particular are bad for your health and can cause asthma and other allergies. Blinds are better than drapes for this reason.

Your home is filled with potentially dangerous problems, but you can avoid them simply by taking care to ventilate, clear away unsafe products and keep things like drapes clean (or remove them). If you’re still concerned about your air quality, call an expert to investigate.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

What is R410A? A Question From Southlake

Tuesday, October 4th, 2011

If you’ve recently started researching a new air conditioner for your Southlake home, you may have run across “R410A” – a newer form of refrigerant increasingly being used in high end air conditioning equipment. What is R410A and why is it different from the existing refrigerant most air conditioners have?

Chemical Composition

R-410A is a composite of diflouromethane and pentafluoromethane. This mixture of R-32 and R-125 creates a new compound designed to be used in commercial and residential air conditioning devices. Sometimes referred to as Puron, Genetron and EcoFluor, R-410A is a more environmentally friendly approach to cooling than the existing coolant most air conditioners use – R-22.

To date, R-22 has been the refrigerant of choice for millions of devices. However, because R-22 will no longer be permitted in new devices starting in 2020, R-410A is growing in popularity rapidly and will soon become the standard refrigerant option in new devices.

Environmental Impact

Despite being very similar in chemical composition to other refrigerants like Freon and R-22, R-410A does not contribute to ozone depletion, a major step forward for air conditioning. However, it has as very similar global warming impact – producing nearly 1725% more damage than carbon dioxide. One of the factors that negates this high global warming risk is the fact that R-410A is being used in a more efficient manner than past refrigerants.

Choosing R-410A

You cannot simply replace the R-22 in your cooling system with R-410A. Because it requires higher pressure, the devices that run with R-410A must be built specifically for this refrigerant. As a result, many manufacturers are starting the transition to the new refrigerant now, in anticipation of the 2020 phase out date for R-22. If you are preparing to buy a new unit, keep this in mind. You can still buy R-22 devices, but they are not as environmentally friendly as this newer form of refrigerant.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off

How to Maximize Savings in Your Home: Some Advice From Hurst

Thursday, September 15th, 2011

When you are thinking about different ways you might be able to save money around your Hurst house, the tendency is to think big. Maybe you need to upgrade to a more energy efficient furnace, or it could be time to install a new central air conditioning system.

But before you do any of that, you may want to try some quick and easy ways to save money around the house with the equipment you already have. Here are 10 great ways to cut your power usage and keep those energy bills down without investing a lot in new equipment.

  1. Seal Up Your House – No matter how energy efficient the heating and cooling systems are in your house, you will be using more energy than necessary if your house is not tightly sealed. Make sure there are not cracks or places where drafts can get in and you will start saving money right away.
  2. The Right Thermostat Setting – Are you really going to notice the difference between 72°F and 69°F? Probably not, but you will save about 3% off of your monthly heating bill for every degree you turn the thermostat down. The same goes in the summer too, just backwards.
  3. Programmable Thermostats – And while we are on the subject of thermostats, it is a good idea to invest in a new one with programmable settings. That way you will be able to set your house to be warm when you will be there and you do not have to pay to keep it warm all day long if it is empty.
  4. Ceiling Fans – Ceiling fans can help keep you cooler in the summer and warmer in the winter. Plus, they cost very little to run so they are a great investment.
  5. Light Bulbs – Switching to energy efficient fluorescent bulbs all over your house will save you a ton even though they cost a bit more to begin with.
  6. Lights Out – But energy efficient bulbs will only get you so far. You should also be sure to turn off the lights in any room you are not using.
  7. Insulation – Proper insulation will go a long way towards keeping in the temperature controlled air that you want and keeping out the outdoor air that you do not.
  8. Power Strips – Many home appliances draw a small amount of power even when they are not turned on. Use a power strip to easily cut the power to them completely and eliminate that drain.
  9. Sealing Windows – Plenty of air can come and go through your windows as well. Upgrading to more energy efficient windows is certainly an option, but you can also help to seal up your home inexpensively by covering your windows with plastic.

Tags: , , , ,
Posted in Energy savings, Insulation | Comments Off